Fit the tag in the middle third of the ear, between the cartilage ribs and away from visible veins.
Keep the number readable as the tag maker directs. Close the applicator once, then check that the tag has locked.
Six steps with an applicator
- Secure the head with a trained handler and clean the ear.
- Check that the ear tag and applicator are compatible.
- Load both halves and line up the pin and hole.
- Choose the clear middle section, avoiding veins, old holes and thick cartilage.
- Press firmly once, release the jaws and check the lock without pulling the ear.
- Record the number against the animal and check the site afterwards for swelling or discharge.
Do not pull out a damaged tag. A trained person can use an ear tag remover. Ask the local veterinary service before replacing an official identification tag.
Livestock



